जलस्य संरक्षणं कुर्वन्तु

AIR POLLUTION CONTROL DEVICES

“AIR POLLUTION CONTROL DEVICES ”

We offer Air Pollution Control Device, which is widely used for Industries generating fumes, Smokes, Odours, Pungent gases, repairing, fog, and fine dust. Our Air Pollution Control System helps in decreasing pollution and maintains an eco-friendly environment. The Air Pollution Control System is available in customized specifications.
WET SCUBBER
 Wet scrubbers are effective air pollution control devices for removing particles and/or gases from industrial exhaust streams. A wet scrubber operates by introducing the dirty gas stream with a scrubbing liquid – typically water. Particulate or gases are collected in the scrubbing liquid. Wet scrubbers are generally the most appropriate air pollution control device for collecting both particulate and gas in a single system.
Pollution Systems offers a variety of wet scrubber systems specifically designed for your process application. Many important operating variables are considered when evaluating the size and type of scrubber for any specific application. We will work with you and use our experience and knowledge to provide the proper solution for your process.


Types of Wet Scrubbers:


Chemical Scrubbers / Gas Scrubbers
Particulate Scrubbers / Venturi Scrubbers
Ammonia Scrubbers
Chlorine Scrubbers
Particulate / Dust Scrubbers
Sulfuric Acid Scrubbers
...


“Types of Effluent Treatment Plant: ”

Typical wet scrubber systems consist of a scrubbing vessel, ductwork and fan system, mist eliminator, pumping (and possible recycle system), spent scrubbing liquid treatment and an exhaust stack. Modern controls are used to monitor the system and make any necessary adjustments.
Wet scrubbers are common in many industrial applications including pollutant reduction at petroleum refineries, chemical processes, acid manufacturing plants, and steel making.

Applications:

  • Pharmaceutical
  • Power Plants
  • Foundries
  • Chemical
  • Cement Engineering
Attributes:
  • Durable
  • High performance
  • Reduces pollution
  • Modular design
  • Reliable

CYCLONE DUST COLLECTOR
Cyclone separators typically separate 99% of the dust particles >10 microns from the air stream and deposit them into a collection bin before reaching the filter. This means you won't have to clean your shop vac or dust collector filter nearly as often if you use a cyclone separator. This convenience has made cyclone separators a very common workshop accessory. Cyclone separators are just one of four common types of filtration systems. Other types of filtration systems include filters, wet collectors and electrostatic precipitators. Wet filters are not common in home workshops because they require frequent maintenance and raise humidity levels. Filters can remove particles down to 0.3 microns.

MULTI-CYCLONE DUST COLLECTOR
Multi cyclone dust collector & Multi cyclone separator works on the same principle as single cyclone dust collector using inertia & Centrifugal force forming dual vortex to separate heavier dusts from dust laden gas. The efficiency of a cyclone separators in collecting finer dusts is highly depends on the amount of centrifugal forces created and longer residence time to allow more dusts to settle down. These two factors increases better separation of particles. The centrifugal force can be increased by reducing the cyclone diameter and the residence time can be increased by increasing the cone height. To match with airflow requirements and optimal pressure drop, large number of thinner and longer cyclones are arranged in parallel and combining all inlets in to one common inlet and all outlets into one common outlets. The pressure drop of Multicyclone is comparably higher than a single cyclones of same CFM but this higher pressure drop yields higher efficiency.